RK3588 8nm Process Custom Board, WF-C3588-N6, AndroidSBC, Hamilton

TL;DR: RK3588 8nm Process Custom Board

Hamilton, Canada - September 12, 2026. A 26,605-unit consignment of WF-C3588-N6 boards left the Wanlin Longgang source factory for Hamilton this week, the 151st production lot released on the Rockchip RK3588 line.

AndroidSBC opens the custom RK3588 motherboard platform to overseas OEM buyers and industrial integrators serving Hamilton, Canada. The WF-C3588 line is a custom motherboard programme built on the Rockchip RK3588 octa-core platform (4x Cortex-A76 at 2.4GHz plus 4x Cortex-A55 at 1.8GHz on 8nm) with a triple-core NPU delivering 6 TOPS of INT8 inference, 8K H.265 decode and up to 32GB of LPDDR4X or LPDDR5. AndroidSBC, the export arm of Wanlin Manufacturing Group, builds nine custom variants at the Longgang source factory in Shenzhen for Hamilton and Canada buyers: WF-C3588-A0 custom Android motherboards, WF-C3588-I1 custom industrial boards, WF-C3588-M2 core boards and SOMs with carrier design, WF-C3588-S3 custom signage and video wall boards, WF-C3588-K4 custom kiosk and POS boards, WF-C3588-R5 custom robotics controllers, WF-C3588-N6 custom NVR boards, WF-C3588-E7 custom edge AI boards, and WF-C3588-P8 custom ARM PC and NAS boards.

About AndroidSBC and the Rockchip RK3588 Board Family

The WF-C3588 is a nine-variant custom motherboard programme from AndroidSBC, the export arm of Wanlin Manufacturing Group in Shenzhen. One Rockchip RK3588 silicon, nine custom categories: custom Android motherboards, custom industrial boards, core board and SOM work, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant handles SMT, burn-in and pre-shipment inspection in one building, and the export desk handles the CE, FCC, UKCA, RoHS and IEC 62368-1 file per lot. For Canada importers, the line covers the custom board categories a Hamilton distributor is most often asked to quote.

WF-C3588-N6 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-N6 (Custom NVR and Security Surveillance Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For Canada importers sourcing the WF-Series, the 16GB + 128GB (WF-C3588-N6-C) variant is the typical configuration for the custom NVR and surveillance programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom NVR and Security Surveillance Board for Canada Buyers

The recurring problem for Hamilton and Canada buyers sourcing a custom nvr and security surveillance board is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3588 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 26,605-unit push lands mid-quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Hamilton have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves all three risks inside the factory: the custom variant is assembled at Longgang, the certified image is burned on the same line, and the Technical File ships with the lot. Across the nine WF-C3588 variants the coverage runs from smart NVRs, multi-camera recorders, face recognition terminals, access control, turnstile controllers, intercom stations, LPR cameras, perimeter systems, and behaviour analytics, with three memory configurations per variant, so a Hamilton buyer can usually match a requirement from the standard custom range.

The Canada paperwork question is settled before production. In Canada ISED certification is separate from the safety listing and both are checked at the border, so the two files have to travel together. The Longgang export desk prepares the destination-market file covering ISED certification with a CSA or UL safety listing administered by ISED Canada and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Port of Vancouver on the Vancouver to Yantian lane.

Competitive Comparison: WF-C3588-N6 vs Competing RK3588 Boards

The comparison set for the custom nvr and security surveillance board socket breaks three ways: catalogue boards with fixed I/O and no engineering support, re-badged imports with a sticker but no schematic, and source-factory custom boards that carry the BSP, the test bench and the certification desk in-house. The WF-C3588-N6 is in the last group, and the separation comes from Rockchip RK3588, from customization depth, and from the per-lot certified image burn.

• vs generic NVR chipsets: the WF-C3588-N6 carries the analytics on the 6 TOPS NPU, so the recorder does not ship a cloud subscription as a hidden dependency.
• vs PC-based recorders: a fanless board replaces a workstation-class recorder and survives gate cabinets and outdoor enclosures.
• vs camera-side AI splits: one board class covers the NVR, the face terminal and the turnstile, which simplifies spares and firmware across one estate.
• vs unbranded surveillance boards: the per-lot file and the burn-in record are what an installer needs when a perimeter line has to answer for uptime.

Global Custom NVR and Surveillance Board Market Trends

The Custom NVR and Surveillance Board market sets the pace for Hamilton procurement this year, and it does not move on its own. The Edge AI hardware segment that MarketsandMarkets values at USD 26.9 billion in 2025, with a 32.7 percent CAGR reaching USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), sets the silicon allocation backdrop that custom RK3588 motherboard buyers also compete for. Three patterns stand out in the WF-C3588 order book for Canada:

• City surveillance NVR: a municipal programme records and analyses sixteen channels per node on a fanless board.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-N6 board carries that headroom without a board change.
• License plate recognition gate: a parking operator pairs LPR on the NPU with relay control for the barrier.

For the Custom NVR and Surveillance Board category the practical signal in Canada is that framework agreements are replacing spot buying, and the agreements are getting longer.

Read together, the three patterns explain the move in Hamilton from spot quotes to framework agreements released monthly, which is what a custom RK3588 motherboard programme needs to hold a twelve-month shipping window without a mid-year break.

Partner Success Story: Iris Building Systems in Hamilton, Canada

Iris Building Systems, a smart building integrator serving the Canada market, deployed 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme. The rollout covered the city surveillance nvr, license plate recognition gate, and retail loss prevention workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme
• Region: Hamilton, Canada
• Models used: WF-C3588-N6 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Qingdao with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Vancouver via the Vancouver to Yantian lane

"We specified the I/O count, they routed the board. The DIN-rail clip, the conformal coating and the dual GbE uplinks were all line items on one quote from one factory, which is the entire reason we stopped shopping integrator bundles."

- Liang Chen, Systems Director

Field Report: a new-build residential complex in Hamilton, where 26,605 units of the WF-C3588-N6 board are being provisioned as building gateways

Reporter Zhao Lei, on the ground in Hamilton, Canada. The developer placed one WF-C3588-N6 gateway unit in every apartment riser. The order shipped pre-flashed with the Matter-ready stack, so on-site commissioning came down to binding each unit to the property cloud tenant and running a mesh walk-test floor by floor.

Pallet weights were checked against the packing list at the dock, and the container was sealed 25 minutes before the cut-off.

The inspection confirmed three things on the spot: the WF-C3588-N6 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering ISED certification with a CSA or UL safety listing administered by ISED Canada, cleared for entry at Port of Vancouver on the Vancouver to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that Canada importers can hand straight to their customs broker.

Filed by Zhao Lei, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-N6 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-N6 (Custom NVR and Security Surveillance Board) as the lead SKU for Hamilton and Canada programmes:

• City surveillance NVR: a municipal programme records and analyses sixteen channels per node on a fanless board.
• Face recognition terminal: a corporate lobby runs face-based entry with the camera and the reader bank on one multi-serial profile.
• License plate recognition gate: a parking operator pairs LPR on the NPU with relay control for the barrier.
• Perimeter detection site: a critical facility runs behaviour analytics at the fence line with local alarm relay.
• Building intercom station: a property network runs door stations on the wide-temperature variant outside the lobby.
• Retail loss prevention: a chain correlates POS events with camera analytics on the same recorder board.
• Turnstile controller: a stadium estate drives turnstiles and readers from the same board family as its recorders.
• Construction site security: a contractor deploys sealed NVRs with 4G failover where no cabling exists.

Partnership Models for Hamilton Buyers

Three commercial structures are open to Hamilton buyers on the WF-C3588-N6 and the rest of the WF-C3588 custom variants:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

The three tiers share one factory, one test flow and one certification file. For Hamilton buyers the standard entry point on the WF-C3588-N6 is the 16GB + 128GB (WF-C3588-N6-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample on standard variants and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A Canada buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.

What certifications does a custom board need for Canada, and who handles them?

Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a Canada market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a Canada programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-N6 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.

Contact AndroidSBC: Start Your WF-C3588-N6 Sourcing Conversation

The AndroidSBC export desk handles all WF-C3588 enquiries from Hamilton and Canada. Direct factory contact on the WF-C3588-N6 and the rest of the custom nvr and security surveillance board line is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: ISED certification with a CSA or UL safety listing for Canada, administered by ISED Canada, entering at Port of Vancouver on the Vancouver to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

OEM and ODM enquiries move fastest when the first message carries the annual volume, the customization scope and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-C3588 MOQ matrix inside two business days.